Roofmount 1.5M With Angle Adjustment

1.5 Metre Non-Invasive Mount with Base Angle Adjustment

ROOFMOUNT4 non-invasive ballast mast with an adjustable mast angle in relation to the ground is designed for the installation of TV antennas, data transmission antennas and CCTV cameras.

It enables installation on flat, resistant surfaces in places where interference in the structure or roof sheathing is impossible or inadvisable.

The base of the ballast mast, 1.5 m high and 38 mm in diameter, consists of 4 frames measuring 41.5 × 26.5 cm allowing the installation of 8 concrete blocks measuring: 38 cm × 24cm × 12 cm.

The bracket is equipped with a mechanism enabling free adjustment of the pole's angle of inclination in relation to the ground 0...5°.

This allows the mast to be positioned vertically on surfaces with a slight slope, facilitating proper installation and ensuring the stability of the entire structure.

Key features:

• base made of 3 mm thick galvanised steel sheet, extrusion moulded
• single frame size: 41.5 × 26.5 cm
• base dimension when folded: 91.0 × 53.0 cm
• galvanised mast length 1.5 m
• smooth adjustment of the mast's tilt angle in relation to the ground 0...5°
• the top of the mast is sealed with a plastic plug to protect the inside of the pipe from moisture
• mast is designed to be loaded with concrete blocks with dimensions: 38 cm × 24 cm × 12 cm
• blocks must be loaded onto the base and fastened with a plastic strap (e.g. PP strap)

Stability

ROOFMOUNT4 non-invasive ballast mast loaded symmetrically with 8 concrete blocks measuring: 38x24x12 cm (8 x 21 kg) remains stable with a side load of up to 30 kgf applied 5 cm below the top of the mast.