Labgear Hybrid LNB Quad plus 2 x W/B

Input frequency

low band: 10.7 ~ 11.7 GHz

high band: 11.7 ~ 12.75 GHz

Feedhorn – Linear

Optimised for offset dish

Output Frequency

Output 1, 2, 3, 4

low band: 950 ~ 1950 MHz

high band: 1100 ~ 2150 MHz

Output 1,2,3,4 VSWR

(950 – 2150 MHz)

Ratio 2.0:1 (typ.), 2.5:1 (max.)

L.O. frequencies

9.75 / 10.6 GHz

L.O. Stability

0.5 ~ 1.0 MHz

L.O. Phase Noise

-55dBc/Hz @ 1kHz (max.)

-75dBc/Hz @ 10kHz (max.)

-90dBc/Hz @ 100kHz (max.)

Conversion Gain

56 ~ 63 dB @ 25ºC

54 ~ 60 dB @ -40ºC ~ 60ºC

Gain Flatness

Over Full Band

3 dB P-P (typ.), 5 dB P-P (typ.)

Gain Flatness @ 26MHz

@ 300MHz

/- 0.5 dB P-P (typ.)

/- 4 dB P-P (typ.)

1.7GHz

-50 dB (typ.) -47 dB (max.)

Noise Figure

0.3 dB (typ.), 1.0 dB (max.)

Cross Polar Isolation

Image Rejection

37 dB (min), 40 dB (typ.)

Current Consumption

120mA (typ.), 140mA (max.)

Operating Voltage &

Band Switching

Vertical 11.5 – 14.5 VDC

Horizontal 15.5 – 19 VDC

Low-Band 0 KHz

High-Band 18 – 26 KHz

Connector Type

75 female F-connector

Operating Temp.

-40’C ~ 60’C

RED Compliance

EN 303 372-1

Input Frequency

10.7 ~ 12.75 GHz

Output frequency

Vertical: 290 ~ 2340 MHz

Horizontal: 290 ~ 2340 MHz

L.O. frequencies

10.41 GHz

L.O. Stability

/-0.5 MHz (max) @ Room Temp.

/-1 MHz (max) @ -40°C ~ 60°C

L.O. Phase Noise

-50dBc/Hz @ 1kHz (max.)

-75dBc/Hz @ 10kHz (max.)

-100dBc/Hz @ 100kHz (max.)

Noise Figure

0.1 dB (typ.)

Conversion Gain

50 dB (min) / 60 dB (max)

Gain Flatness @ 26MHz

/-0.5dB (typ.)

Gain Variation

7dB (max.) @ full band

Cross Polar Isolation

25 dB (typ.)

Image Rejection

Current Consumption

0.85W (max.) (70mA @ 12V DC)

Power Voltage

9 – 19V DC

Connector Type

75 female F-connector

Output Spurious

<-60dBm

Operating Temp.

-40’C ~ 60’C

RED Compliance

EN 303 372-1