Roofmount 1M With Angle Adjustment

Roofmount5 is a 1non-invasive ballast mast with angle adjustment is suitable for the installation of TV/data antennas or CCTV surveillance cameras.

The bracket is equipped with a mechanism enabling free adjustment of the pole's angle of inclination in relation to the ground 0...5°.

This allows the mast to be positioned vertically on surfaces with a slight slope, facilitating proper installation and ensuring the stability of the entire structure.

Suitable for flat roofs or patios.

It enables installation on flat, solid surfaces in places where interference with the structure or roof sheathing is impossible or inadvisable. The base of the ZB-1000/38 RAM2 ballast mast, 1 m high and 38 mm in diameter, consists of 2 frames measuring 41.5 × 26.5 cm allowing the installation of 4 concrete blocks measuring: 38 cm × 24cm × 12 cm.

Key features:

• base made of 3 mm thick galvanised steel sheet, extrusion moulded
• single frame size: 41.5 × 26.5 cm
• base dimension when folded: 61.0 × 41.5 cm
• galvanised mast length 1 m
• continuously adjustable angle of inclination of the mast in relation to the ground: 0...5°
• the top of the mast is sealed with a plastic plug to protect the inside of the pipe from moisture
• mast is designed to be loaded with concrete blocks with dimensions: 38 cm × 24 cm × 12 cm
• blocks must be loaded onto the base and fastened with a plastic strap (e.g. PP strap)

Stability

ROOFMOUNT5 non-invasive ballast mast loaded symmetrically with two concrete blocks measuring: 38x24x12 cm (2 x 21 kg) remains stable with a side load of up to 10 kgf applied 5 cm below the top of the mast.