ULTIMODE 2dB Optical Attenuator SC to SC for Single Mode Cable
This optical attenuator (SC female to SC male) with 2 dB insertion loss for single-mode optical fibers, above 1300 nm. Using optical devices over short distances, one should make sure that the signal strength at the input of the receiver will not damage the device.
The attenuator should be connected directly to the input the receiver.
SC connectors are currently the most popular optical coupling elements due to simple matching (push-pull coupling with a snap), rectangular cross-section allowing dense packing of the connectors on the panel, and plastic construction (of course outside the ferrule).
Distinguishing features:
Wavelength [nm] | Typical attenuation [dB] |
1300 | 2.4 |
1310 | 2 |
1490 | 2.2 |
1550 | 2.4 |
![]() | Check out our newsletter for latest offers & updates | ![]() | ATC Supplies accepts payments via Paypal™ |